一、安装网络适配器
1.关闭系统的电源
2.建议要求避免静电的影响，接地
3.确定适配器安装的槽口
4.移除后面的遮盖板
5.将适配器插入槽口中
二、检验安装过程
1.打开计算机电源
2.当旗帜限时出来，按Stop-A中断启动进程，进入ok提示符状态
3.使用show-devs命令显示系统设备
一台sparc 10未安装时显示如下：
/SUNW,ultraSPARC-II i@0,0
/pci@1f,0
/virtual-memory
/memory@0,10000000
/aliases
/options
/openprom
/chosen
/packages
/pci@1f,0/pci@1
/pci@1f,0/pci@1,1
/pci@1f,0/pci@1,1/ide@3
/pci@1f,0/pci@1,1/SUNW,m64B@2
/pci@1f,0/pci@1,1/network@1,1
/pci@1f,0/pci@1,1/ebus@1
/pci@1f,0/pci@1,1/ide@3/cdrom
/pci@1f,0/pci@1,1/ide@3/disk
/pci@1f,0/pci@1,1/ebus@1/SUNW,CS4231@14,200000
/pci@1f,0/pci@1,1/ebus@1/flashprom@10,0
/pci@1f,0/pci@1,1/ebus@1/eeprom@14,0
/pci@1f,0/pci@1,1/ebus@1/fdthree@14,3023f0
/pci@1f,0/pci@1,1/ebus@1/ecpp@14,3043bc
/pci@1f,0/pci@1,1/ebus@1/su@14,3062f8
/pci@1f,0/pci@1,1/ebus@1/su@14,3083f8
/pci@1f,0/pci@1,1/ebus@1/se@14,400000
/pci@1f,0/pci@1,1/ebus@1/SUNW,pll@14,504000
/pci@1f,0/pci@1,1/ebus@1/power@14,724000
/pci@1f,0/pci@1,1/ebus@1/auxio@14,726000
/openprom/client-services
/package/ufs-file-system
/package/sun-keyboard
/package/SUNW,builtin-drivers
/package/disk-label
/package/obp-tftp
/package/deblocker
/package/terminal-emulator
安装后如下：
/SUNW,ultraSPARC-II i@0,0
/pci@1f,0
/virtual-memory
/memory@0,10000000
/aliases
/options
/openprom
/chosen
/packages
/pci@1f,0/pci@1
/pci@1f,0/pci@1/pci@2
/pci@1f,0/pci@1/pci@2/SUNW,isptwo@4
/pci@1f,0/pci@1/pci@2/SUNW,hme@0,1
/pci@1f,0/pci@1/pci@2/pci108e,1000@e
/pci@1f,0/pci@1/pci@2/SUNW,isptwo@4/st
/pci@1f,0/pci@1/pci@2/SUNW,isptwo@4/sd
/pci@1f,0/pci@1
/pci@1f,0/pci@1,1/ide@3
/pci@1f,0/pci@1,1/SUNW,m64B@2
/pci@1f,0/pci@1,1/network@1,1
/pci@1f,0/pci@1,1/ebus@1
/pci@1f,0/pci@1,1/ide@3/cdrom
/pci@1f,0/pci@1,1/ide@3/disk
/pci@1f,0/pci@1,1/ebus@1/SUNW,CS4231@14,200000
/pci@1f,0/pci@1,1/ebus@1/flashprom@10,0
/pci@1f,0/pci@1,1/ebus@1/eeprom@14,0
/pci@1f,0/pci@1,1/ebus@1/fdthree@14,3023f0
/pci@1f,0/pci@1,1/ebus@1/ecpp@14,3043bc
/pci@1f,0/pci@1,1/ebus@1/su@14,3062f8
/pci@1f,0/pci@1,1/ebus@1/su@14,3083f8
/pci@1f,0/pci@1,1/ebus@1/se@14,400000
/pci@1f,0/pci@1,1/ebus@1/SUNW,pll@14,504000
/pci@1f,0/pci@1,1/ebus@1/power@14,724000
/pci@1f,0/pci@1,1/ebus@1/auxio@14,726000
/openprom/client-services
/package/ufs-file-system
/package/sun-keyboard
/package/SUNW,builtin-drivers
/package/disk-label
/package/obp-tftp
/package/deblocker
/package/terminal-emulator
通过测试工具进行测试
监视网络活动
在OK提示符状态下，使用apply watch-net
/pci@1f,0/pci@1/pci@2/SUNW,hme@0,1

重新启动系统，boot -r
三、配置host文件
1.为系统作准备
在命令行方式下，执行：
grep hme /etc/path_to_inst
创建/etc/hostname.hem文件
配置/etc/host文件