|
 |
推荐文章 |
|
|
|
|
|
|
|
|
|
|
How to deal with 'system is not bootable' |
|
BOOT: Explanation of the "FATAL: system is not bootable, boot command is disabled" OBP message
--------------------------------------------------------------------------------
Keyword(s):OBP, error, fatal, boot
Description Top
This infodoc explains what the "FATAL: system is not bootable, boot command is disabled" OBP
message indicates and what can be done to get the system to boot up.
Document Body Top
This type of a warning can appear on systems such as a Sun Fire V880.
In most cases, this warning occurs at the OBP "ok" prompt if the power-up
initialization (right after the banner was displayed) was aborted. Usually,
this is done by using the Stop-A keystroke (XIR Reset).
If after such an occurence "boot" command is executed, the system displays
the following error:
{1} ok boot
FATAL: OpenBoot initialization sequence prematurely terminated.
FATAL: system is not bootable, boot command is disabled
The system at that point does not boot.
In most cases, this just means that since the proper initialization of the
machine wasn't allowed to complete, the system is unable to boot. This is
done to make sure that OS deamons (such as picld) do not have problems as
they start up during boot (because of the improperly initialized memory,
etc.).
To get the machine to boot properly, issue the "reset-all" command or press
"STOP" key and "N" key together while machine is turning on (release both
keys when you see lights flash on keyboard) and allow the machine to boot
up "hands off".
Note: This "Stop + N" combination is only true when keyboard and
monitor/console are attached to the machine.
If for whatever reason the "boot" command has to be entered manually,
execute the following commands at the "ok" prompt:
setenv auto-boot? false
reset-all
Now, the machine will reset. Allow it to fully initialize. It will then
give the ok prompt without booting automatically.
At this point if the "boot" command is manually executed, it should work
without errors. Also, before running the manual boot, the "auto-boot?"
variable can be set back to "true". This way, the system will again be
set back to its original setting for the next time it is reset or power
cycled.
NOTE: seeing only the "FATAL: system is not bootable ..." message even
after following the above procedure most likely indicates a real problem
(possibly a hardware problem) with that machine.
Internal Only Top |
|
|
|
|
|
特别声明： 本站除部分特别声明禁止转载的专稿外的其他文章可以自由转载，但请务必注明出处和原始作者。文章版权归文章原始作者所有。对于被本站转载文章的个人和网站，我们表示深深的谢意。如果本站转载的文章有版权问题请联系编辑人员，我们尽快予以更正。 |
|
|
|
|
|
责任编辑： 原点 |
投稿作者： 本站收集 |
|
|
信息来源： 网络 |
录入时间： 2005-4-19 |
|
|
|
| |
|
设为首页
加入收藏
总编信箱
投稿或申请专栏请先 [登 陆]